Contact Advantech Search Shopping list
  1. +65-6442-1000
  2. Login

PC/104

The increased speed to market capabilities, card-to-card buses, and low cost standard PC software all make the PC/104 form factor extremely attractive. Advantech PC/104 and PC/104-Plus CPU boards provide a wide range of CPU offerings from Ultra-Low Power 486 to Atom™. If your PC/104 solution requires low heat, take advantage of the low-power flexibility that the AMD® Geode™ and Vortex have to offer.
Results per page 91872 | Sort by Price Highest / Lowest
Page 1 of 2
PCI-1220U-AE
CIRCUIT BOARD, 2-axis Stepping/Pules-type Servo Motor Card
  1. Independent 2-axis motion control
  2. Hand wheel and jog function
  3. 2-axis linear and circular interpolation function
  4. Continuous interpolation function. Constant speed control
  5. Programmable T/S-curve acceleration/deceleration rate
  6. Two pulse output types: CW/CCW or pulse/direction. Up to 4 Mpps output for each axis
  7. Two encoder pulse input types: A/B phase or up/down. Up to 1 MHz encoder input for each axis
  8. Position management and software limit switch function. BoardID™ switch

US$577

Compare More
PCI-1245-AE
Standard 4-Axis DSP-Based SoftMotion Controller
  1. Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode
  2. Pulse output up to 5 Mpps
  3. Memory buffer (10K points) for trajectory planning which is designed in DSP
  4. Supports E-Gear, and helical interpolation
  5. Supports E-CAM providing 256 points to describe the CAM profiles which buffers located in DSP
  6. Hardware emergency input
  7. Watchdog timer
  8. Position latch via ORG & index signal
  9. Position compare triggering up to 100 KHz, and memory buffer is up to 100 K points in DSP

US$908

Compare More
PCI-1245L-AE
CIRCUIT BOARD, Basic 4-Axis SoftMotion Controller
  1. Encoder input is 4 MHz for 4xAB mode, 1 MHz for CW/CCW mode
  2. Pulse output up to 1 Mpps and the output type can be switched to differential or single-end by jumper setting
  3. Supports 2 axis linear interpolation
  4. Supports T/S-curve
  5. Supports speed override
  6. Hardware emergency input
  7. Watchdog timer

US$303

Compare More
PCI-1265-AE
Standard 6-Axis DSP-Based SoftMotion Controller
  1. Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode
  2. Pulse output up to 5 Mpps
  3. Memory buffer (10K points) for trajectory planning which is designed in DSP
  4. Supports E-Gear, and helical interpolation
  5. Supports E-CAM providing 256 points to describe the CAM profiles which buffers located in DSP

US$1,243

Compare More
PCI-1285-AE
8-Axis DSP-Based SoftMotion Controller PCI Card
  1. Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode
  2. Pulse output up to 5 Mpps
  3. Memory buffer (10K points) for trajectory planning which is designed in DSP
  4. Supports E-Gear, and helical interpolation, E-CAM providing 256 points to describe the CAM profiles which buffers located in DSP
  5. Watchdog timer, Position latch
  6. Position compare triggering up to 100 KHz, and memory buffer is up to 100 K points in DSP
  7. Supports gantry mode by semi-closed loop pulse train control
  8. RDY/LTC-dedicated input channels & SVON/CMP/CAM-DO/ERC-dedicated output channels are switchable for general input and output purposes

US$1,128

Compare More
PCI-1784U-AE
4-axis Quadrature Encoder and 4-ch Counter Universal PCI Card with 8-ch Isolated Digital I/O
  1. Four 32-bit up/down counters
  2. Single ended or differential inputs
  3. Pulse/direction and up/down counter
  4. x1, x2, x4 counts for each encoder cycle
  5. Optically isolated up to 2,500 VDC
  6. 4-stage digital filter with selectable sampling rate
  7. On-board 8-bit timer with wide range time-base selector
  8. Multiple interrupt sources for precision application
  9. 4 isolated digital input
  10. 4 isolated digital output
  11. BoardID™ switch

US$437

Compare More
APAX-5080-AE
4/8-ch High Speed Counter Module
  1. Supports multiple operating modes: 1.Up mode 2.Up/Down mode 3.Pulse/Direction mode 4.A/B Phase mode 5.Frequency mode
  2. 4 or 8 counter channels depends on operating modes
  3. 32-bit counter range with 1 bit overflow/underflow
  4. 1 MHz counter frequency
  5. 4 digital input channels with counter gate functionality
  6. 4 digital output channels with counter alarm output functionality
  7. Over voltage, short circuit and thermal protection design

US$266

Compare More
AMAX-1220-AE
Open Frame 2-Axis Motion Module
  1. End limit logic is switchable (high or low active)
  2. BoardID is switchable
  3. Easily visible LED indicators on board to do diagnosis.
  4. Direct wire to servo drive to save terminal board space while installation.
  5. Max. 6.5 MHz, 4-axis pulse output
  6. 28 bits counter for incremental encoder
  7. Horizontal installation for for servo or stepping motor driver
  8. Suitable for DIN-rail mounting

US$462

Compare More
AMAX-1240-AE
Open Frame 4-Axis Motion Module
  1. End limit logic is switchable (high or low active)
  2. BoardID is switchable
  3. Easily visible LED indicators on board to do diagnosis
  4. Direct wire to servo drive to save terminal board space while installation
  5. Max. 6.5 MHz, 4-axis pulse output
  6. 28 bits counter for incremental encoder
  7. Horizontal installation for for servo or stepping motor driver
  8. Suitable for DIN-rail mounting

US$693

Compare More
Page 1 of 2
x
Contact Us

+65-6442-1000

8:30 ~ 17:30

Contact Advantech