Contact Advantech Search Shopping list
  1. +604-5379188
  2. Login
Home Boards & Cards Motion Control PC/104 Centralized Motion Control

Centralized Motion Control

Centralized motion control solutions include 4-axis, 6-axis, 8-axis motion control cards andembedded motion controller, utilizing a high-performance DSP to calculate the motion trajectories and FPGA to process critical motionI/O
Results per page 91872 | Sort by Price Highest / Lowest
Page 1 of 1
PCI-1220U-AE
CIRCUIT BOARD, 2-axis Stepping/Pules-type Servo Motor Card
  1. Independent 2-axis motion control
  2. Hand wheel and jog function
  3. 2-axis linear and circular interpolation function
  4. Continuous interpolation function. Constant speed control
  5. Programmable T/S-curve acceleration/deceleration rate
  6. Two pulse output types: CW/CCW or pulse/direction. Up to 4 Mpps output for each axis
  7. Two encoder pulse input types: A/B phase or up/down. Up to 1 MHz encoder input for each axis
  8. Position management and software limit switch function. BoardID™ switch

US$577

Compare More
PCI-1245-AE
Standard 4-Axis DSP-Based SoftMotion Controller
  1. Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode
  2. Pulse output up to 5 Mpps
  3. Memory buffer (10K points) for trajectory planning which is designed in DSP
  4. Supports E-Gear, and helical interpolation
  5. Supports E-CAM providing 256 points to describe the CAM profiles which buffers located in DSP
  6. Hardware emergency input
  7. Watchdog timer
  8. Position latch via ORG & index signal
  9. Position compare triggering up to 100 KHz, and memory buffer is up to 100 K points in DSP

US$908

Compare More
PCI-1245L-AE
CIRCUIT BOARD, Basic 4-Axis SoftMotion Controller
  1. Encoder input is 4 MHz for 4xAB mode, 1 MHz for CW/CCW mode
  2. Pulse output up to 1 Mpps and the output type can be switched to differential or single-end by jumper setting
  3. Supports 2 axis linear interpolation
  4. Supports T/S-curve
  5. Supports speed override
  6. Hardware emergency input
  7. Watchdog timer

US$303

Compare More
PCI-1265-AE
Standard 6-Axis DSP-Based SoftMotion Controller
  1. Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode
  2. Pulse output up to 5 Mpps
  3. Memory buffer (10K points) for trajectory planning which is designed in DSP
  4. Supports E-Gear, and helical interpolation
  5. Supports E-CAM providing 256 points to describe the CAM profiles which buffers located in DSP

US$1,243

Compare More
PCI-1285-AE
8-Axis DSP-Based SoftMotion Controller PCI Card
  1. Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode
  2. Pulse output up to 5 Mpps
  3. Memory buffer (10K points) for trajectory planning which is designed in DSP
  4. Supports E-Gear, and helical interpolation, E-CAM providing 256 points to describe the CAM profiles which buffers located in DSP
  5. Watchdog timer, Position latch
  6. Position compare triggering up to 100 KHz, and memory buffer is up to 100 K points in DSP
  7. Supports gantry mode by semi-closed loop pulse train control
  8. RDY/LTC-dedicated input channels & SVON/CMP/CAM-DO/ERC-dedicated output channels are switchable for general input and output purposes

US$1,128

Compare More
PCI-1784U-AE
4-axis Quadrature Encoder and 4-ch Counter Universal PCI Card with 8-ch Isolated Digital I/O
  1. Four 32-bit up/down counters
  2. Single ended or differential inputs
  3. Pulse/direction and up/down counter
  4. x1, x2, x4 counts for each encoder cycle
  5. Optically isolated up to 2,500 VDC
  6. 4-stage digital filter with selectable sampling rate
  7. On-board 8-bit timer with wide range time-base selector
  8. Multiple interrupt sources for precision application
  9. 4 isolated digital input
  10. 4 isolated digital output
  11. BoardID™ switch

US$437

Compare More
Page 1 of 1
x
Contact Us

+604-5379188

09:00 ~ 18:00

Contact Advantech